Product Description
CEM DT-156H Coating Thickness Gauge
CV. Syariftama Global Indonesia memiliki berbagai macam Produk CEM Instruments – cari berdasarkan jenis, model, atau filter berdasarkan merek untuk menemukan produk yang Anda cari. Jika Anda masih tidak dapat menemukannya, hubungi kami..
CEM DT-156H Coating Thickness Gauge
- Dual Technology Features Automatic Magnetic Induction Selection or Eddy Current Measuring Technique
- Non-ferrous metal coating on an insulating substrate
- Menu operating system
- Two working modes: DIRECT and GROUP Easy mode
- one-point calibration, two-point calibration, and basic calibration
- Delete single readings and all group readings easily
- Low battery, error indication
- USB interface for PC software
Features CEM DT-156H Coating Thickness Gauge :
| Features CEM |
DT-156 |
|
| Non-magnetic coatings e.g. paint zinc on steel |
* |
* |
| Insulating coatings eg paint on no-ferrous metals |
* |
* |
| No-ferrous metals coatings on insulating substrates |
* |
* |
| Menu operation system |
* |
* |
| Two measuring modes: CONTINUE and SINGLE mode |
* |
|
| Two working modes: DIRECT and GROUP mode |
* |
* |
| Statistic Display: AVG, MAX, MIN, NO., S.DEV |
* |
|
| One point calibration, two points calibration and basic calibration easily |
* |
* |
| Memory for 400 readings (80 DIRECT and 320 GROUP readings) |
* |
|
| Memory for 1500 readings ( 30 GROUP readings) |
* |
|
| Delete single readings and all group readings easily |
* |
* |
| High alarm and Low alarm for all working modes |
* |
|
| Low battery, error indication |
* |
* |
| USB interface for PC software |
* |
* |
| 4 levels of battery indication |
* |
|
| Error indication |
* |
|
| Easily adapt to lighting conditions with 8 levels of backlight |
* |
Spesifikasi CEM DT-156H Coating Thickness Gauge:
| Specifications |
DT-156 |
DT-156H |
||
| Sensor probe |
F |
N |
F |
N |
| Working principle | magnetic induction | Eddy current principle | magnetic induction | Eddy current principle |
| Measuring range | 0~1250um | 0~1250um | 0~1350um | 0~1350um |
| Guaranteed tolerance (of reading) | .(+/- 3%+1)one | *(+/- 3%+1.5)one | ^(+/- 2.5%+2) one | (+/- 2.5%+2) one |
| Repeatability | *(+/- 1%+1)one | ^(+/- 1%+1)one | “(+/- 1%+1)one | ,(+/- 1%+1)one |
| Low range Precision | *0.1um | :0.1um | ^0.1um | “0.1um |
| Minimum curvature radius | 1.5mm | 3 mm | 1.5mm | 3 mm |
| Diameter of Minimum area | 7mm | 5mm | 7mm | 5mm |
| Basic critical thickness | 0.5mm | 0.3mm | 0.5mm | 0.3mm |
CEM DT-156H – Datasheet
Produk asli Kami distributor langsung CEM Instruments Harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilaya Indonesia.
Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami cek untuk memastikan produk dalam keadaan baik dan siap kirim.
