• Display: 4 digits, 18 mm LCD
• Measured values and makers
• (units, 10,and battery symbol)

Transducer:

• Piezoelectric accelerometer
• Parameters measured:
• Velocity, Acceleration, and Displacement RPM and Frequency

Measuring range:

• Velocity:
• 0.01-400mm/s2 true RMS
• 0.000-16.00 inch/s2

Acceleration:

• 0.1-400.0m/s equivalent peak
• 0.3-1312 ft/s
• Displacement : 0.001-4.000mm
• 0.04-160.0 mil , equivalent pk-pk
• RPM (r/min) : 60-99,990 r/min
• Readings should be multiplied by 10 if the display show ’10’.
• Frequency: 1-20 kHz
• Frequency range for measuring
• Acceleration :
• 10Hz. to 1kHz. In ‘1’ mode
• 10Hz. to 10kHz. In ’10’ mode for bearing condition check
• Velocity : 10Hz. to 1kHz.
• Displacement : 10Hz. to 1kHz.
• Accuracy: 5%+2 digits
• Metric/ Imperial conversion
• PC interface: RS232C
• Output: AC output 2.0V peak full scale (load resistance: above 10k)
• Power supply: 4×1.5 AAA size (UM-4) batteries
• Power off : 2 modes
• Manual off at any time

Operating conditions:

• Temperature : 0-50 C
• Humidity : below 90% RH
• Accessories included :
• Powerful rare earth magnet…1 pc.
• Accelerometer……………….1 pc.
• Stinger probe (Cone)……….1 pc.
• Stinger probe (Ball)………..1 pc.
• Carrying case………………..1 pc.
• Operation manual…………..1 pc.
• Optional accessories:
• Headphones for use as electronic stethoscope Cable and software for RS232C
• Optional function: Bluetooth (including software)