Elitech STC-8080A+ Thermostat

Product Description

Elitech STC-8080A+ Thermostat

Digital Thermostat or Digital Thermostat is a digital temperature control device that has a probe as a sensor, which is used to turn electrical equipment on and off according to the desired temperature

This digital temperature regulator is very useful for regulating electrical equipment such as coolers, automatic heaters such as egg incubators, aquariums, computer coolers, etc.

Advantages of Digital Thermostat compared to manual:
– Stable performance and control accuracy
– Easy-to-read screen
– Smart and energy-efficient Embedded Chip (MCU)

Features:

• The lower limit and the upper limit determine the target temperature range, from -40 to 50 °C; Set them directly by shortcut key;
• Embed NVM to auto memory exists parameters, resume all data once power back, need not configure it again;
• Adjustable Temperature Calibration;
• Control the refrigeration by temperature and fixed delay time; the compressor works 15mins and stops 30 mins once sensor error;
• Control the defrosting by time and the artificial forced-defrosting available;
• Alarm by error code on display, and the buzzer screams;
• Control the alarm by temperature.

specification:

• Measure range -50 to 99 c
• Setting range -40 to 50 c
• Resolution 1 c
• Accuracy +-1 c (-40 to 50 c), +-2c (Other)
• Supply voltage 220Vac, 110Vac, 50/60Hz; 12Vac/dc, 24Vac/dc
• Power consumption Less than 3W
• Output types Two mechanical relay
• Input types One NTC
• Panel size 75×34.5 mm
• External dimensions 75×34.5×85 mm
• Perforation dimensions 71 10×29 10 mm
• Control method ON/OFF Control
• Setting method Touch switch
• Indication method 8-segment 3-digital display and LED indication
• Front panel IP Rating IP64
• Operating temperature 0 to 55 c
• Operating humidity 20% to 85% RH, non-condensing
• Storage temperature -30 to 75 c
• Alias name freezer temperature controller, defrost thermostat, freezer thermostat

Elitech STC-8080A+ – Datasheet