Gloss Meter WGG60

1. Buttons:

ON/OFF boot, turn off the key

STORE storage key, ascending key

CHECK query key, down key

SET settings key

MEASURE measuring key, return key

2. Introduction to basic operation

2.1 measurement process

Boot, the interface shows “press the measuring key, work”, the gloss meter measuring face quasi test items, press the “MEASURE” button, 2 seconds after reading the measurement value.

2.2 correction process

Boot interface display by measuring key, work “, press the SET button,” backlight “and” correction “option, press the down key switch; according to the” correction “column, and then click” SET “,” correction standard value, press the set button correction “will measure the export at the standard plate, put firm, flat, press” SET “button, the screen will display the correct value, adjust the up and down keys to the actual correction value, press the” SET “button to confirm the correction value.

3 backlight settings

Turn on the machine, press “SET”, press the “up and down” button, select “back light”, press “SET” button, then press the up and down key, to the corresponding backlight status, press the “SET” to confirm.

Specification:

• Reading range 0 ~ 199.9gu
• Measurement range 0 ~ 150.0gu
• Index value 0.1gu
• Indication error value + / – 1.2gu
• Zero value error value 0.2gu
• Stability 0.4gu
• Projection angle 60 degrees
• Power supply two 7 batteries
• Weight 0.3KG
• Size 129 * 45 * 73mm

WGG-60 (Series) meets international standard ISO-1813 and GB/T 9754. In line with the provisions of ASTM, D2457, ASTM, D523, and GB/T13891, GB/T 7706 and GB/T 8807 standards. Meet the requirements of the national 696-2002 JJG, “mirror gloss meter” and “gloss board” of the one or two meter measuring machine.