Hioki CM4142 Clamp meter

Product Description

Hioki clamp on meter adalah perangkat pengukur terbaik di kelasnya yang menggabungkan keahlian Hioki dalam teknologi penginderaan saat ini. CM4142 adalah meteran penjepit True RMS 2000A AC yang dilengkapi rahang ramping berdesain unik yang memungkinkan Anda dengan mudah masuk ke celah sempit antara kabel dalam kotak distribusi listrik yang padat tanpa takut merusak kabel atau meteran penjepit. Kisaran suhu pengoperasian -25℃ hingga 65℃ yang luas dan penutup IP50 yang tahan debu dan tahan air untuk memungkinkan para profesional bekerja dengan cepat di panel distribusi listrik yang padat. Kemampuan pengukuran arus yang tinggi membuatnya sangat berguna untuk aplikasi industri. Gunakan teknologi nirkabel Bluetooth bawaan untuk mengirim data pengukuran secara nirkabel ke perangkat seluler dan membuat laporan.

CAT IV 600 V
CAT III 1000 V

Fitur Hioki CM4142 Clamp meter :

Mudah masuk ke ruang sempit antar kabel berkat sensor tipis dengan rentang penampang minimal 11 mm
Ukur hingga 2000 A AC
AC A, AC dan DC V, DC+AC V, resistansi, frekuensi, suhu, dan lainnya
Kisaran suhu operasi -25 °C hingga 65 °C yang diperluas
Kirim nilai terukur ke smartphone atau tablet menggunakan teknologi nirkabel Bluetooth® (hanya CM4142)

Spesifikasi Hioki CM4142 Clamp meter :

AC Current range	60.00 A to 2000 A, 3 ranges (45 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±1.5% rdg. ±0.08 A
Crest factor	For the 60.00 A range: 2.5 (greater than 50.00 A and less than or equal to 60.00 A) to 2000 A range: 1.5 (2000 A or less)
DC Voltage range	600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV)
AC Voltage range	6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45-66 Hz: ±0.9% rdg. 0.003 V (at 6 V)
DC+AC Voltage range	6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45-66 Hz: ±1.0% rdg. ±0.013 V (at 6 V)
Resistance range	600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
Electrostatic capacity range	1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
Frequency range	Voltage: 9.999 Hz to 999.9 Hz 3 ranges, Current: 99.99 Hz to 999.9 Hz 2 ranges, Basic accuracy: ±0.1% rdg. ±0.01 Hz (at 99.99 Hz)
Temperature (K)	-40.0 to 400.0 ˚C, Basic accuracy: ±0.5% rdg. ±3.0 ˚C + temperature probe accuracy
Other functions	Continuity check, Diode check, Automatic AC/ DC detection (Voltage check only), Max/ Min/ AVG/ Peak waveform MAX/ Peak waveform MIN value display, Low-pass filter function, Display value hold, Backlight, Auto power save, Buzzer sound, Zero-adjustment, and other function
Dustproof, waterproof	IP20 (Current measurement of voltage or hazardous live conductors under completely dry condition) IP50 (When measuring or storing the resistance of a completely dry state or the current of an insulated conductor), However, dustproof and waterproof design equivalent to IP54 only on the handheld part and in a non-measurement state.
Interface	Bluetooth® 4.0LE, Supported devices: iOS, Android™ smartphone/tablet GENNECT Cross (free downloadable app) : display measured values and waveforms, Simple logging function, Waveform monitor function, Hold save function
Power supply	LR03 Alkaline battery ×2, Continuous use: 48 hr (Backlight OFF, Bluetooth® OFF), 24 hr (Backlight OFF, Bluetooth® ON)
Core jaw diameter	φ55 mm (2.17 in), Jaw dimension: 82 mm (3.23 in) W × 11 mm (0.43 in) D (D dimension is a range value of 44 mm (1.73 in) from the tip of the jaw)
Jaw cross-section	Minimum dimension 11 mm (0.43 in) (Range value of 44 mm (1.73 in) from the tip of the jaw)
Dimensions and mass	65 mm (2.56 in) W × 247 mm (9.72 in) H × 35 mm (1.38 in) D, 300 g (10.6 oz)
Accessories	TEST LEAD L9207-10 ×1, CARRYING CASE C0203 ×1, LR03 Alkaline battery ×2, Instruction Manual ×1, Usage notes ×1, Caution on using radio waves ×1 (CM4142 only)