Product Description
Kyoritsu KEW 5020 Loggers
Features Kyoritsu KEW 5020 Loggers :
- Power Quality analysis
- Large capacity for storing 60,000 data points
- Lowpass Filter will filter out the harmonics
- LED flickers when the preset current/voltage value is exceeded
- CALL:Confirmation of recorded data
- Selection of One-time mode or Endless mode
- Non Volatile Memory
- Battery power indicator
- The userfriendly PC software “KEW LOG Soft 2” is supplied
- Continuous measuring time:Approx. 10 days (Alkaline Battery)
Specifications Kyoritsu KEW 5020 Loggers :
- 3 channel inputs for the simultaneous recording of Leakage Current, Load Current and Voltage
- Large Capacity for storing 60,000 data points
- 60,000 data points can be recorded when 1ch is used, and when all the three channels are used, 20,000 data points per channel can be recorded
- Lowpass Filter will filter out the harmonics (Cutoff Frequency = Approx. 160Hz)
- LED flickers when the preset current / voltage value is exceeded
- CALL: Confirmation of recorded data
- The following can be displayed: number of recorded data points, (max+ min+ peak) value for each channel complete with time/date information in the Normal recording mode. (Detected values (i.e. when values are outside preset limits ) can be displayed in other recording modes)
- RECALL: The last 10 recorded data points including time/date can be recalled on the logger display
- Selection of One-time mode or Endless mode
- One-time on: Recording will stop when memory is used up
- One-time off: Overwrite the old data, and store the latest data
- Non Volatile Memory
Recorded data will be retained even if the batteries are exhausted or replaced due to the presence of a nonvolatile memory (guaranteed for 10 years) - Battery power indicator
Indicates battery voltage in 4-levels
(It is possible to use the logger for a further approx. 24 hours even after the warming symbol is flashing) - The userfriendly PC software “KEW LOG Soft 2” is supplied
- Supplied with the user friendly software “KEW LOG Soft 2”. This permits editing, analysis and graphical display of data.
- The recorded data is downloadable onto a PC via USB cable.
- Variation of the measured voltage and current data can be confirmed simultaneously on the PC display monitor. (only on KEW 5020)
- Simplified Power Integration
(The “KEW LOG Soft 2” uses current and voltage recorded to calculate the integral power consumption) - Continuous measuring time: Approx. 10 days (Alkaline Battery)
Normal Recording Mode
(AC 50/60Hz, Sine wave, Input: 10% or more of the range at CH1)
| Range | RMS Accuracy |
|---|---|
| 100.0mA | ±2.0%rdg±0.9%f.s.+ Accuracy of Sensor |
| Other ranges | ±1.5%rdg±0.7%f.s.+ Accuracy of Sensor |
| Crest Factor | 2.5 or less: RMS accuracy (sine) + 2%rdg + 1%f.s. |
Max, Min and Instant Peak values in Normal Recording mode are just reference values:
their accuracies aren’t guaranteed.
Trigger Recording Mode (AC 50/60Hz sine wave)
| Range | Accuracy |
|---|---|
| 100.0mA | ±3.5%rdg±2.2%f.s.+ Accuracy of Sensor |
| Other ranges | ±3.0%rdg±2.0%f.s.+ Accuracy of Sensor |
Capture Recording Mode
| Range | Accuracy |
|---|---|
| 100.0mA | ±3.0%rdg±1.7%f.s.+ Accuracy of Sensor |
| Other ranges | ±2.5%rdg±1.5%f.s.+ Accuracy of Sensor |
| Recording mode | Normal, Trigger, Capture, Power Quality Analysis |
|---|---|
| Operating system | Successive Approximation (CH1 single synchronized sampling) |
| Rated max. working voltage | AC 9.9Vrms, 14V peak value |
| Number of input channel | 3ch |
| Measuring method | True RMS |
| RMS measuring interval | approx. 100ms |
| Sampling interval | Normal/Trigger mode : approx. 1.65ms/CH Capture mode : approx. 0.55ms (waveform: at every 1.1ms) P.Q.A mode : approx. 0.55ms |
| Current range | 8146 (30A type) : 100.0/1000mA/10.00/30.0A 8147 (70A type) : 100.0/1000mA/10.00/70.0A 8148 (100A type) : 100.0/1000mA/10.00/100.0A 8121 (100A type) : 10.00/100.0A 8122 (500A type) : 50.00/500.0A 8123 (1000A type) : 100.0/1000A 8128 (5A type) : 5.000A/(50.00A) 8127 (100A type) : 10.00A/100.0A 8126 (200A type) : 20.00A/200.0A 8125 (500A type) : 50.00A/500.0A 8124 (1000A type) : 100.0A/1000A 8130 (1000A type) : 100.0/1000A |
| Voltage range | 8309 (600V type) : 600.0V |
| Low battery warning | Battery mark display (in 4 levels) |
| Over-range indication | “OL” mark is displayed when exceeding the measuring range |
| Auto power off | Power-off function operates automatically after a switch remains for 3min. (when recording is stopped) |
| Possible measurement time | Approx. 10 days (with alkaline LR6 batteries) |
| Applicable standards | IEC 61010-1:2001 CAT III 300V Pollution degree2 IEC 61326 (EMC standard) |
| Dimensions | 111(L)×60(W)×42(D)mm |
| Weight | Approx. 265g |
| Included Accessories | Alkaline battery LR6×4pcs, 9118 (Carrying case) PC software “KEW LOG Soft 2”, 7148 (USB cable) Instruction manual, Quick manual, Install manual, USB Notice sheet |
| Optional Accessories | 8146/8147/8148 (Leakage & Load current Clamp Sensor), 8121/8122/8123 (Load current Clamp Sensor), 8128/8127(*1)/8126(*1)/8125(*1)/8124 (Load current Clamp Sensor), 8130(*1) (Flexible Clamp Sensor), 8320 (AC Adapter), 9135 (Carrying bag), 9119 (Hard carry case), 7185 (Extension cable for sensor) |
——————————————————————————————————————————————————————————————————
CV. Syariftama Global Indonesia Grup adalah Supplier dan Distributor Kyoritsu di Jawa Barat, Jual Kyoritsu KEW 5020 Loggers, Berbagai Merek Tersedia di Syariftama.com
Jual Kyoritsu KEW 5020 Loggers harga kompetitif Tentunya Gratis antar untuk Area Jakarta dan dapat dikirim keseluruh Indonesia, Jika Anda butuh bantuan silahkan hubungi Customer Service (026) 5540 5390 & Whatsapp di 0813-1864-0412 dan Email [email protected]
