Kyoritsu KEW 6315 Power Quality Analyzer

Product Description

Kyoritsu KEW 6315 Power Quality Analyzer

Features Kyoritsu KEW 6315 Power Quality Analyzer :

  • Simultaneous Power & Power quality measurements
  • Helpful support functions
  • Measurement with high accuracy
  • Remote monitoring on PC and Android device
  • Various Clamp Current Sensors
  • Energy consumption check on site
  • IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V

CE

 

 

TRUE RMS

USB

Bluetooth

External

 

 

Specifications Kyoritsu KEW 6315 Power Quality Analyzer :

  • Simultaneous Power & Power quality measurements
  • Power/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)
  • Helpful support functions
  • Quick Start Guide, Wiring check and Sensor detection for easy and reliable measurement
  • Measurement with high accuracy
  • Guaranteed accuracy:±0.3%rdg (energy),±0.2%rdg (voltage/ current)
    Complies with the International Standard IEC 61000-4-30 Class S and the European Standard EN50160
  • Remote monitoring on PC and Android device
  • Remote checking of measurement in real-time is possible via Bluetooth communication.
  • Recorded data can be saved in the supplied SD card.
  • EN50160 report can be generated after survey by PC software.
  • Various Clamp Current Sensors
  • Various types of clamp and flexible sensors are available:
    from 1000mA Range up to 3000A Range and Earth leakage measurements
  • Energy consumption check on site
    Trend and demand graphs for easy recognition.
    TFT color display with high resolution.
  • IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V

Power Quality Analyzer

Wiring connections 1P2W, 1P3W, 3P3W, 3P4W
Measurements and parameters Voltage, Current, Frequency, Active power, Reactive power, Apparent power,Active energy, Reactive energy, Apparent energy, Power factor (cos θ),
Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption, Transients/Over voltage, Inrush current, Unbalance rate),
Capacitance calculation for PF correction unit, Flicker
Voltage (RMS)
Range 600.0 / 1000V
Accuracy ±0.2%rdg±0.2%f.s. (sine wave, 40 – 70Hz)
Allowable input 1 – 120% of each range (rms). 200% of each range (peak)
Display range 0.15 – 130% of each range
Crest factor 3 or less
Sampling speed of Voltage transient 24µs
Current (RMS)
Range 8128 ( 50A type ) : 5000mA / 50.00A / AUTO
8127 ( 100A type ) : 10.00 / 100.0A / AUTO
8126 ( 200A type ) : 20.00 / 200.0A / AUTO
8125 ( 500A type ) : 50.00 / 500.0A / AUTO
8124/8130 ( 1000A type ) : 100.0 / 1000A / AUTO
8146/8147/8148 ( 10A type ) : 1000mA / 10.00A / AUTO
8133 ( 3000A type ) : 300.0 / 3000A / auto
Accuracy ±0.2%rdg±0.2%f.s. + accuracy of clamp sensor (sine wave, 40 – 70Hz)
Allowable input 1 – 110% of each range (rms). 200% of each range (peak)
Display range 0.15 – 130% of each range
Crest factor 3 or less
Active power
Accuracy ±0.3%rdg±0.2%f.s. + accuracy of clamp sensor
(power factor 1, sine wave, 40 – 70Hz)
Influence of power factor ±1.0%rdg (reading at power factor 0.5 against power factor 1)
Frequency meter range 40 – 70Hz
Power supply (AC Line) AC100 – 240V / 50 – 60Hz / 7VA max
Power supply (DC battery) Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6
Battery life approx. 3h (LR6, Backlight OFF)
Internal memory FLASH memory (4MB)
PC card interface SD card (2GB)
PC communication interface USB Ver2.0, Bluetooth Ver2.1 + EDR Class2
Display 320 × 240 (RGB) Pixel, 3.5inch color TFT display
Display update period 1 sec

General

Applicable standards IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V Pollution degree 2
IEC 61010-2-030, IEC 61010-031, IEC 61326, EN 50160
IEC 61000-4-30 Class S, IEC 61000-4-15, IEC 61000-4-7
Temperature and humidity range 23±5ºC, less than 85% RH (without condensation)
Operating temperature & humidity range 0 – +45ºC, less than 85% RH (without condensation)
Storage temperature & humidity range -20 – +60ºC, less than 85% RH (without condensation)
Power supply (AC Line) AC100 – 240V / 50 – 60Hz / 7VA max
Power supply (DC battery) Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6
Battery life approx. 3h (LR6, Backlight OFF)
Dimensions 175(L) × 120(W) × 68(D) mm
Weight Approx. 900g
Included Accessories 7141B (Voltage test lead)
7170 (Power cord)
7219 (USB cable)
8326-02 (SD card 2GB)
9125 (Carrying case for KEW 6315, KEW 6315-01)
9135 (Carrying case for KEW 6315-03, KEW 6315-04, KEW 6315-05)
Input terminal plate × 6, KEW Windows for KEW 6315 (software),
Quick manual, Alkaline size AA battery (LR6) × 6
Optional Accessories 8124, 8125, 8126, 8127, 8128 (Load current clamp sensor)
8130, 8133 (Flexible clamp sensor)
8146, 8147, 8148 (Leakage and Load current clamp sensor)
8312 (Power supply adaptor)
9132 (Magnetc carrying case)

 

 

——————————————————————————————————————————————————————————————————

CV. Syariftama Global Indonesia Grup adalah Supplier dan Distributor Kyoritsu di Jawa Barat, Jual Kyoritsu KEW 6315 Power Quality Analyzer, Berbagai Merek Tersedia di Syariftama.com

Jual Kyoritsu KEW 6315 Power Quality Analyzer harga kompetitif Tentunya Gratis antar untuk Area Jakarta dan dapat dikirim keseluruh Indonesia, Jika Anda butuh bantuan silahkan hubungi Customer Service (026) 5540 5390 & Whatsapp di 0813-1864-0412 dan Email [email protected]

Product Enquiry

PRODUK TERKAIT

BUAT PERMINTAAN HARGA

Open chat
1
Butuh bantuan? chat WA
Terima Kasih Telah Menghubungi Kami.