Product Description
Nabertherm Ashing Furnaces with Integrated Exhaust Gas Cleaning
The ashing furnace L ../11 BO is specially designed for processes in which larger sample quantities have to be incinerated. Fields of application are e.g. the ashing of food, thermal cleaning of injection molding tools or the determination of annealing loss. Another application is the debinding of ceramic products, e.g. after additive production.
The ashing furnaces have a passive safety system and integrated exhaust gas post combustion. An exhaust gas fan extracts flue gases from the furnace and simultaneously supplies fresh air to the furnace atmosphere with the result that sufficient oxygen is always available for the incineration process. The incoming air is guided behind the furnace heating and preheated to ensure good temperature uniformity. Exhaust gases are led from the furnace chamber to the integrated post combustion system, where they are postburned and catalytically cleaned. Directly after the incineration process (up to max. 600 °C) a subsequent process up to max. 1100 °C can take place.
Features Nabertherm Ashing Furnaces with Integrated Exhaust Gas Cleaning :
- Tmax 600 °C for the incineration process
- Tmax 1100 °C for the subsequent process
- Three-side heating (both sides and bottom)
- Ceramic heating plates with embedded heating wire
- Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
- Dual shell housing made of structured stainless steel provides for low outer temperature and high stability
- Steel collecting pan protects the bottom insulation
- Spring-assisted closing of the furnace door (flap door) with mechanical locking against unintentional opening
- Thermal/catalytic post combustion, integrated in the exhaust channel, up to 600 °C in function
- Temperature control of post combustion can be set up to 850 °C
- Monitored exhaust air
- Inlet-air preheated through the bottom heating plate
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Defined application within the constraints of the operating instructions
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
Additional equipment
- Process control and documentation via VCD software package for monitoring, documentation and control
Specification Nabertherm Ashing Furnaces with Integrated Exhaust Gas Cleaning :
| Model | Tmax | Inner dimensions in mm | Volume | Outer dimensions² in mm | Max. weight of hydrocarbons | Max. evaporation rate | Connected load | Electrical | Weight | ||||
| °C | w | d | h | in l | W | D | H¹ | in g | g/min | kW | connection* | in kg | |
| L 9/11 BO | 1100 | 230 | 240 | 170 | 9 | 415 | 575 | 750 | 75 | 01.00 | 07.00 | 3-phase | 60 |
| L 24/11 BO | 1100 | 280 | 340 | 250 | 24 | 490 | 675 | 800 | 150 | 02.00 | 09.00 | 3-phase | 90 |
| L 40/11 BO | 1100 | 320 | 490 | 250 | 40 | 530 | 825 | 800 | 200 | 02.05 | 11.05 | 3-phase | 110 |
| 1Including exhaust tube (Ø 80 mm)*Please see page 73 for more information about supply voltage | |||||||||||||
| 2External dimensions vary when furnace is equipped with additional equipment. Dimensions on request. | |||||||||||||
Nabertherm Ashing Furnaces with Integrated Exhaust Gas Cleaning – Catalog
Jual Nabertherm Ashing Furnaces with Integrated Exhaust Gas Cleaning dengan harga murah dan berkualitas bergaransi tentunya. dapat di kirim ke seluruh wilaya Indonesia.
Syariftama Global Indonesia memiliki beragam produk Nabertherm cari berdasarkan jenis, atau model, atau filter berdasarkan merek untuk menemukan yang Anda cari. Jika Anda masih tidak dapat menemukannya hubungi kami di No Tlpon 0851 6306 9421 /SMS/Whatsapp.
