Its colour TFT touch screen offers perShapence that enables, in addition to controlling the equipment by operational parameters, the possibility of exporting data for analysis and timer programmed operation. The autonomy that this equipment gives to the user reduces the work time, by the automatization of the cycles and work modes, ensuring the process traceability. It has a refrigeration system that enables it to maintain the minimum temperature of the chamber below 4°C regardless of the type of rotor and the speed selected.

Features Ortoalresa Centrifuge Digtor 22R :

TFT color touch screen, visible from more than 3 m.:

• Shows RPM and RCF, time, temperature, acceleration/deceleration values (PCBS) and unbalancing location system (ULS).
• Speed programming in 10 RPM/10 xg steps.
• Real RCF values on screen based in accessories configuration.
• Count up/down from “0” or at “set RPM/RCF” for test reproducibility.
• Timer countdown/up from “0” or at “set RPM/ RCF” for reproducible tests.
• Timer from 1 min to 99 hours programmable in 1 sec. steps and hold position.
• PCBS: Progressive controlled acceleration and braking system up to 175 selectable ramps that prevents sample homogenization after separation.
• ULS: Unbalancing location system indicating on the screen the number of the bucket which produces the unbalance switch off.
• 40 programmable memories, with protection under password.
• Several acoustic and visual messages warning the user the device situation.

User friendliness

• Microprocessor controlled. PC connection.
• Induction motor maintenance free (brushless).
• Rotors and adapters list on memory.
• Noise level: below 60 dB.
• Start, stop, open lid and short spin with adjustable speed buttons.
• Option of free/locked adjustment of RPM/ RCF along the run.
• Last values remain in memory.
• Automatic rotor recognition. Over-speed protection.

Safety

• Lid provided with security systems:
• Automatic lid lock system, motorized with double lock.
• Emergency lid-lock release.
• Locking and protection against opening along the run.
• Lid dropping protection.
• Port in the lid for calibration and operation checking.
• Unbalance detection and switch off.
• Protection safety ring between the centrifugation chamber and the housing.
• Chamber of centrifugation in stainless steel (easy cleaning).
• Rotors can be removed with the lid closed.
• Rotors and adapters autoclavable, easy to install by the user.
• Automatic disconnection for energy saving up to 8 h.

Cooling

• Remains the refrigeration after centrifugation process.
• Precooling program with rotor spinning and temperature selectable.
• Guarantee 4 °C at maximum RPM.
• Temperature range from -20°C (-4°F) to 40°C (104°F) in 1°C/1°F steps. Programmable in °C o °F.
• Temperature sensor inside the chamber.
• Gas R 449A HFO (CFC free).

Standards and Directives

EU Directives: 2011/65/EU, 2012/19/EU, 2014/30/EU, 2014/35/EU, 98/79/EC.
Regulation n°: (EC) 1005/2009, (EU) 517/2014.
Standards: EN 61010-1, EN 61010-2-020, EN 61326-2-6, EN 61326-1.