SANWA EM7000 Analog Multimeter

Category Tag

SANWA EM7000 Analog Multimeter

The EM7000 is a FET (field-effect transistor) analog multimeter with a zero-deflection scale, which is great for testing low-power circuits. It has an accuracy of ±3.0% of full scale, and can also measure the peak-to-peak values of an input signal (triangular, square-wave) over a 20% duty cycle. The device is also capable of measuring resistances up to 200MΩ and is highly sensitive when measuring lower value capacitances. It is recommended to use the device in an environment with a temperature less than 40 degrees Celsius at a maximum altitude of 2000m indoor, with pollution degrees level II.
  • High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
  • Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
  • Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
  • Wide range resistance measurement from 0.2Ω to 200MΩ

Product Description

SANWA EM7000 Analog Multimeter

CV. Syariftama Global Indonesia has a wide range of SANWA products – search by type, or model, or filter by brand to find the one you are after. If you still can’t find it contact us..

The EM7000 is a FET (field-effect transistor) analog multimeter with a zero-deflection scale, which is great for testing low-power circuits. It has an accuracy of ±3.0% of full scale, and can also measure the peak-to-peak values of an input signal (triangular, square-wave) over a 20% duty cycle. The device is also capable of measuring resistances up to 200MΩ and is highly sensitive when measuring lower value capacitances. It is recommended to use the device in an environment with a temperature less than 40 degrees Celsius at a maximum altitude of 2000m indoor, with pollution degrees level II.

The EM7000 comes with a set of test leads (TL-21a), instruction manual and a spare fuse (250V / 0.5A).

Feature SANWA EM7000 Analog Multimeter :

  • High-sensitivity FET electronic tester with high input resistance (2.5M – 12MΩ for DCV) and 0.12μA range (DC current)
  • Frequency response against 40Hz to 1MHz of sine wave (AC low voltage)
  • Measurement of P-P value (Peak to Peak value) of square wave pulse (duty cycle 20% or higher)
  • Wide range resistance measurement from 0.2Ω to 200MΩ

Specification SANWA EM7000 Analog Multimeter :

Function Measuring range Tolerance
DCV 0.3/1.2/3/12/30/120/300/1000V(2.5~12MΩ) ±3% of full scale
±DCV ±0.15/0.6/1.5/6/15/60/150/600V(2.5~12MΩ) ±7% of full scale
AC voltage rms(50/60Hz) 3V(approx.2.5MΩ)/12V(approx.1.1MΩ) 30V/120/300V(approx.800KΩ)/750V(approx.10MΩ) ±3% of full scale
ACV
P-P
Sine wave 8.4V(approx.2.5MΩ/V)/33V(approx.1.1MΩ) 84/330/840V(approx.800KΩ) ±5% of full scale
Square wave 8.4V(2.5MΩ) ±6% of full scale
Triangle wave 8.4V(2.5MΩ) ±6% of full scale
DCA 0.12μ/0.3m/3m/30m/300m/6A ±3% of full scale
DCA ±0.06μ/±0.15m/1.5m/15m/150mA ±7% of full scale
ACA 6A ±5% of full scale
Resistance 2k/20k/200k/2M/20M/200MΩ ±3% of arc
Low-frequency output -10~51dB ±3% of arc
Frequency characteristic AC12V range or lower 40Hz to 1 MHz: frequency response within ±5%
Battery R6P(AA battery)1.5Vx2, 6F22(9V manganese battery)x1
Built-in fuse F1176 Φ5×20mm 0.5A/250V 1.5kA Ceramic fuse
F1177 Φ5×20mm 6.3A/250V 1.5kA Ceramic fuse
Size/Mass H165×W106×D46mm/Approx. 375g

 

Ilustrasi ikon PDF file 3d 22597324 PNGSANWA EM7000   – Datasheet

SYARIFTAMA GLOBAL INDONESIA adalah  distributor dan Supplier SANWA EM7000  di Jawa Barat & Jakarta dan juga menjual BRAND Sanwa  dll. lihat produk kami lainnya di sini KMT , JSI, SGM atau hubungi kami melalui Whatsapp  0821-3010-0456. atau melalui email [email protected]  [email protected] [email protected].

Dalam pengiriman produk yang pelanggan beli, sebelumnya sudah kami periksa untuk memastikan produk dalam keadaan baik dan siap kirim.

Product Enquiry

PRODUK TERKAIT

BUAT PERMINTAAN HARGA

Open chat
1
Butuh bantuan? chat WA
Terima Kasih Telah Menghubungi Kami.